| |
EPOXO 440G is a high solids two-part non-skid epoxy
surfacing compound formulated to meet extreme demands on deck
and airfield surfacing. Recommended for use in the marine,
offshore, and aviation industrial environments.
This heavy duty compound forms tough yet lightweight
abrasion resistant surfacing that protects the substrate from
aggressive chemicals and salt. It is resistant to fire and jet
blast, as well as most acids and alkalis, solvents,
hydrocarbons and jet fuels, including SKYDROL.
| Packaging |
5 US gallon unit (18.9 litres) two
component epoxy in NATO approved steel drums, meets all
shipping requirements including UN, IMCO, and IATA |
| Properties |
| Drying Time |
Light Traffic 12 hours at
21°C
Heavy Traffic 24 hours at 21°C
NB In cooler
weather allow more time |
| Coverage |
Roller application - approx 3 sq
metres per US gallon
Spray application - approx 4 sq
metres per US gallon
Trowel application - approx 5 sq
metres per US gallon |
| Coating Thickness |
450 - 500 microns average when
roller applied |
| Viscosity |
8000 to 14000 Centipoise |
| Flash Point |
28°C (81°F) a low VOC version is
also now available |
| Weight |
1670 grams per litre |
|
EPOXO 440G contains KEVLAR © light weight carbon
fibre, which contributes towards its remarkable
durability and toughness.
EPOXO 440G exceeded the standards of Coefficient of
Friction Tst to ASTM-D-1894 and passed impact tests to
ASTM-D2794. It provides an anti-sparking surface and
passed the standard test for Resistance of Plastics to
Chemical Reagents ASTM-D543 with no peeling, flaking,
blistering, softening, cracking, pitting or delaminating
from the substrate allowed when exposed to a wide range
of chemicals. |
| Advantages |
High corrosion
resistance
Excellent impact resistance
Resistance
to most solvents, hydrocarbons, hydraulic fluids, oils
and petroleum
Unaffected by extreme temperature
changes
Fire resistant once
cured | |
